UHU Glue Tube No.14 (125ML)

UHU All Purpose Adhesive, the proven liquid synthetic resin adhesive for fast and crystal-clear bonds. Suitable for universal applications at home, in the office, for modelling, at school, for crafts etc. Glues various materials rapidly and durably. Once applied, the glue remains temporarily adjustable and does not wrinkle paper.

Universal glue suitable for wood, wood based materials, plastics (ABS, hard and soft PVC, Plexiglas®, polystyrene, Resopal®), metal, glass, porcelain, ceramic, leather, rubber, felt, cork, fabrics, cardboard, paper, many plastics and much more.
  • Crystal-clear Liquid
  • Fast drying
  • Does not wrinkle paper
Product Code: UHU-GTube-14
Brand: UHU GmbH & Co. KG
Availability: In Stock
Rs. 730 Rs. 780
You save Rs. 50 (6% Off)
SUITABLE FOR:
Universal - glues wood, wood based materials, plastics (ABS, hard and soft PVC, Plexiglas®, polystyrene, Resopal®), metal, glass, porcelain, ceramic, leather, rubber, felt, cork, fabrics, cardboard, paper, many plastics and much more.
 

APPLICATION:
Directions for use:Apply the adhesive thinly to one side of the assembly, press the parts together - that’s it! For non-absorbent materials (e.g. ceramic, coated papers), apply to both sides of the assembly, leave to dry, re-apply and press the parts together.
 
Stains/residue: Remove wet glue stains immediately. Dried glue residue and glue stains in clothing can be removed with acetone.
 
Points of attention: Contains volatile, highly inflammable solvents. Appropriate precautions should therefore be taken during storage or when working with the adhesive.
 
CURE TIMES*
Drying/Curing time: approx. Bond strength: on beechwood test specimens tensile strength values (end values) of about 700 N/cm² have been obtained.
Final bonding strength after: approx. Approx. two thirds of the final strength are obtained after 24h.
* Curing time may vary depending on a.o. surface, product quantity used, humidity level and ambient temperature.
 
 
TECHNICAL PROPERTIES
Temperature resistance: The glue’s heat resistance is determined by the thermoplastic nature of its synthetic resin. Thus, glued parts should not continously be exposed to temperature above 70°C.
 
Chemicals resistance: Widely resistant against diluted acids, alkalines and also petrol and oil. NOT SUITABLE FOR: alcohols (e.g. denatured alcohol, white spirit), ketones (e.g. acetone), esters (e.g. ethyl acetate).
 
TECHNICAL SPECIFICATIONS
Appearance: colourless, highly transparent solution
Chemical base: polyvinylester
Consistency: Low viscosity
Viscosity: approx. 30 - 45 mPa.s.
Solvent: Mixture of low-boiling esters, ketones and alcohol
Solid matter: approx. 32-35 %
Density: approx. 0,97-0,99 g/cm³
Specifications: Electrical Data:
Specific volume resistivity (at 0,1 mm film thickness): 10^14 Ω x cm
Breakdown voltage (at 0,2 mm film thickness): 440 kV/cm
Surface resistance (at 0,2 mm film thickness): 2 x 10^11 Ω x cm
 
STORAGE CONDITIONS
Store in a dry, cool and frost-free place.
 
PHYSIOLOGICAL PROPERTIES
The dried adhesive is inert, completely neutral and physiologically indifferent.
No Specifications Found